Rorke Data The Galaxy 65 Dokumentacja Pobierz pdf (Strona 33)

Hardware Installation

2-1

Chapter 2

Hardware Installation

2.1. Installation Overview

This chapter gives detailed instructions on how to install hard disk drives and drive trays

into the subsystem. Installation into a rack or cabinet should occur before hard drive

installation. Please confirm that you received all of the components listed on a printed

copy of Unpacking List included in the shipping package before proceeding with the

installation process.

2.2. Installation Pre-requisites

1. Static-free installation environment: The subsystem must be installed in a static-

free environment to minimize the possibility of electrostatic discharge (ESD)

damage. (See Section 2.3) Use of anti-static wristband and static-control devices

such as ionizers, is recommended.

2. Component check: Before installing the subsystem, you should confirm that you

have received all of the required components by checking the package contents

against the Unpacking List.

3. Memory modules: If you wish to change the pre-installed memory modules, it is

preferred that you install the separately purchased modules during the initial

installation stage. (See Section 2.6.2)

4. Hard drives: Up to 24 hard drives have been pre-integrated into drive trays. On the

rare occasion that a drive needs to be replaced, use this procedure. (See Section 2.7)

5. Cabling: All optical FC cables and SFP transceivers are user-supplied and should be

purchased separately. (See Chapter 4)

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 128 129

Brak uwag

Rorke Data The Galaxy 65 Dokumentacja Strona 33